The load-bearing structures of this XLAM timber villa built in Brianza have been completed.
PROJECT SUMMARY
The project involves the construction of an XLAM timber villa with approximately 220 square meters of floor area.
On the upper level, there is a bedroom accessed via a mezzanine open to the living room below.
The ground floor bedrooms and kitchen have a lowered ceiling at 2.9 m, unlike the living room where the glulam timber roof deck is visible.
There are two main volumes with gable roofs interrupted by a tower with a flat roof.
MATERIALS USED
100 mm 3-layer XLAM timber panels were used for the construction of the load-bearing timber elevation structures.
The roof deck was constructed in glulam timber with overlaid planking and OSB3 bracing panel.
Assignment: Executive design of XLAM timber structures, CAD/CAM file preparation, assembly plan
If you are looking for experienced timber structure designers, contact us!
