Category: Tenders and competitions

New acquisitions, tenders won or lost that we nevertheless found compelling.

  • Executive Project Approved for the New Racchetti – Da Vinci Timber High School in Crema

    Executive Project Approved for the New Racchetti – Da Vinci Timber High School in Crema

    The executive project for the new Racchetti – Da Vinci timber High School in Crema has finally been approved.

    This is an ambitious and challenging project in which we have been involved in the final and executive structural design.

    The new Institute has a total surface area of approximately 10,300 sqm divided into 4 blocks, one of which is partially used as a gymnasium.

    The buildings will accommodate approximately 1,200 students and will be one of the largest school construction projects in Italy.

    The project will be built exclusively using load-bearing timber structures.

    The following material quantities are estimated:

    • 700 cubic meters of glued laminated timber;
    • 21,500 sqm of CLT timber panels for the construction of floors and walls.

    For the foundation structures, the following will be used:

    • 3,500 cubic meters of reinforced concrete;
    • 195,000 kg of reinforcing steel.

    The total cost of the project amounts to €31.5M.

    Given the recent approval by Inail, the start of the construction phase is expected in the first half of 2027.

    For more information about the project, go to this LINK

  • Wooden school campus in Peveragno: PFTE design

    Wooden school campus in Peveragno: PFTE design

    The PFTE design for the construction of the new wooden school campus in the Municipality of Peveragno has been delivered.

    This is a complex project that includes the construction of 4 buildings: kindergarten, primary school, secondary school, and a gymnasium serving both the schools and the community.

    The project features a semi-underground surface connecting all 4 blocks.

    This area is completely permeable to the external plaza thanks to generous glazing.

    The underground section and the first floor slab will be constructed with reinforced concrete structures, while the structures of the upper levels will be in CLT and glulam timber.

    To make the construction faster and more economical, a scaffoldless approach with prefabricated facades has been adopted.

    The floor slabs are constructed with CLT panels, while the roof slabs are constructed with glulam timber beams and overlaid bracing boards.

  • WIN: Awarded the structural timber design competition for the new Monfalcone Campus

    WIN: Awarded the structural timber design competition for the new Monfalcone Campus

    We are very pleased to have won the competition for the structural timber design of the new Monfalcone School Campus; a new complex built with timber structures.

    It consists of a block of 4 buildings including the buildings for the high schools, the shared gymnasium and the connecting gallery.

    structural timber design concept

    We proposed CLT and glulam timber structural design for the new buildings during the tender phase.

    The building complex is located in an area with high seismicity and therefore we decided to employ a hybrid system composed of reinforced concrete bracing cores, glulam timber columns and CLT floors.

    The choice of the hybrid timber-concrete structural system stems from the desire to employ a solution that would be as sustainable as possible. The use of concrete is optimized in the bracing cores while timber works well both for transferring vertical loads and for the construction of floors.

    It is an interesting structural solution that we have already used in the following projects:

    We look forward to starting the design!

    See you soon for updates.

  • Contract Awarded: We Will Design the Timber Structures for the New Rachetti Classical High School

    Contract Awarded: We Will Design the Timber Structures for the New Rachetti Classical High School

    Fornale Engineering has been awarded the contract for the detailed and executive structural design of the new Rachetti Classical High School in Cremona.

    The complex comprises 4 main volumes of 2 floors each, with a total floor area of approximately 9,200 m².

    In addition to spaces dedicated to teaching and laboratories, a gymnasium of approximately 700 m² is included within the volumes.

    The foundation structures will be of the raft type, from which the first and second floor elevations in CLT panels will rise.

    The floors are designed with a system of glulam beams and CLT slabs.

    We estimate a total use of approximately 2,400 m³ of CLT and 650 m³ of glulam.

    We are proud to have been awarded the contract and to be working on the design of this important project in a temporary joint venture with our colleagues at Holzner&Bertagnolli.

    This represents a major challenge for us and for the public administration that has committed to the realization of this project using timber structures.

    A concrete commitment that moves in the precise direction of reducing CO2 emissions associated with the use and production of construction materials.

    The use of load-bearing timber structures will result in a reduction in CO2 emissions that we estimate to be approximately 3,000 tons of CO2.

  • New assignment: structural design of 2 gymnasiums in glulam and CLT

    New assignment: structural design of 2 gymnasiums in glulam and CLT

    Fornale Engineering has been commissioned for the final and executive structural design of 2 new gymnasiums to be built using glulam and CLT.

    The vertical and roofing structures will be constructed using glulam elements and CLT wall and floor panels.

    The first gymnasium covers a total area of approximately 2,175 sqm (including the changing rooms).

    Its construction involves the use of 282 m³ of glulam and 428 m³ of CLT panels (4,030 sqm).

    The second gymnasium covers a total area of approximately 1,310 sqm (including the changing rooms).

    Its construction involves the use of 173 m³ of glulam and 313 m³ of CLT panels (2,700 sqm).

    Both gymnasiums are located in seismic zone 2 and are designed to guarantee R60 fire resistance.

    The project involves a total use of approximately 455 m³ of glulam and 741 m³ of CLT panels (a total of 6,730 sqm of various thicknesses).

  • New assignment: structural design of a middle school in the province of Turin

    New assignment: structural design of a middle school in the province of Turin

    Fornale Engineering has been commissioned for the structural design of a new middle school in the province of Turin.

    The project spans 3 floors with a total floor area of approximately 3,300 m².

    We will handle the executive design of the foundation works and the timber elevation and floor structures.

    This is a structure with load-bearing CLT timber walls of varying thickness with glulam timber floors and an overlying CLT stiffening panel.

    The building will be fire-resistant to R60 and in consequence class C2b.

  • New structural design assignment: multi-story CLT timber building in Sottomarina – VE

    New structural design assignment: multi-story CLT timber building in Sottomarina – VE

    Fornale Engineering has been commissioned for the structural design of a multi-story CLT building in Sottomarina – VE.

    We will handle the detailed design, construction design, and construction supervision of the structures.

    This is a hybrid structure with a reinforced concrete stairwell and a glulam timber frame structure. The floor slab will be made of 5-layer CLT timber with a thickness of 180mm.

    The building will be constructed on a reinforced concrete ground floor.

    All buildings will be fire-resistant R60 and in consequence class C2b.

  • New structural design commission: 5 multi-story CLT buildings in the Netherlands

    New structural design commission: 5 multi-story CLT buildings in the Netherlands

    Fornale Engineering has been commissioned for the structural design of 5 multi-story CLT buildings in the Netherlands.

    We will be responsible for the definitive and executive design, as well as the DfMA of the buildings.

    The project involves approximately 200 residential units for a total of over 7,000 m³ of CLT.

    The buildings, constructed on a reinforced concrete first floor, will consist of 7 stories (4 towers) and 13 stories.

    All buildings will be R120 fire-resistant and in consequence class C2b.

    We will provide assistance from the definitive design phase through to the production of shop drawings, hardware lists, assembly plans, and loading plans.

    A very significant commission for our steadily growing team.

  • Studiofornale receives special mention for the wood-straw building at the Arca Award

    Studiofornale receives special mention for the wood-straw building at the Arca Award

    Yesterday, the wood and straw building we designed in 2019-2020 received a special mention for “the use of wood and straw in a modern prefabrication process” on the occasion of the 10th year of ARCA – Quality and Sustainability Certification.

    It was a major challenge to combine the need to build with wood and straw in an off-site production system that would ensure high seismic/thermal performance.

    The interior and exterior finishes are in local clay on reed mesh.

    This building is a good reference point for those who want to build by combining #circulareconomy with environmental sustainability.

    If you would like to learn more about this project:

    https://lnkd.in/eHbDiWV
  • New project in Spain: CLT timber residential complex in Fuerteventura

    New project in Spain: CLT timber residential complex in Fuerteventura

    Fornale Engineering has been commissioned for the structural design of a CLT timber residential complex in Fuerteventura.

    The project consists of a residential complex comprising 16 units for a total of approximately 2,000 sqm.

    The complex will be built using five alternating building models with variable floor plans, each consisting of two floors.

    The vertical load-bearing structures will be made of CLT panels, while the floors will be of the platform frame type.

    Another exciting challenge begins! Stay connected.

    We are always looking for new challenges… if you have projects that require high-level expertise in the world of timber structures, please contact us!

  • New commission: design of the new timber middle school, nursery, and civic center in Monzuno

    New commission: design of the new timber middle school, nursery, and civic center in Monzuno

    Fornale Engineering has been commissioned for the structural design of the new timber middle and elementary school with a civic center.

    Fornale Engineering will handle the structural design of the entire timber building on reinforced concrete foundation structures.

    It will be a 3-story building covering a total of approximately 3,000 m².

    The ground floor, approximately 1,400 m², will house the auditorium with a capacity of about 300 people over 450 m², and the nursery school classrooms.

    The two upper floors, approximately 800 m² each, will contain the classrooms and spaces for the middle school.

    Except for the reinforced concrete foundation slab, the entire building will be designed with timber load-bearing structures, making extensive use of glulam for beams and columns and CLT for shear walls.

    The total cost for the project is estimated at approximately €3.3M.

    It will be a great challenge! Stay tuned.

    We are always looking for new challenges.. if you have projects that require strong expertise in the world of timber structures, please contact us!!

  • Studiofornale.it wins the design contract for the new Faculty of Engineering – Innovation Hub in Padua!

    Studiofornale.it wins the design contract for the new Faculty of Engineering – Innovation Hub in Padua!

    Fornale Engineering has been awarded, in a temporary partnership with Settanta7 and Stain srl, the contract for the design of the new Faculty of Engineering-Innovation Hub in Padua.

    Fornale Engineering will handle the structural design of the entire building.

    It will be a 4-story building of approximately 2,000 sqm per floor that will accommodate 3,000 students.

    Except for the reinforced concrete foundation slab, the entire building will be designed with load-bearing timber structures, making extensive use of glulam for beams and columns and CLT for shear walls and floors.

    The bracing walls will be constructed with CLT panels of variable thickness on each floor for a total height of 19.5 m.

    The floors, spanning nearly 12 meters, will be designed as CLT-glulam-CLT box-type systems to reduce the structural thickness of the floors.

    The facade system will be prefabricated timber with a non-load-bearing frame structure.

    The total project cost is estimated at approximately €18.5M.

    It will be a great challenge! Stay tuned.

    We are always looking for new challenges..if you have projects requiring strong expertise in the world of timber structures, contact us!!